PCZ Heavy Hammer Crusher

Processing Capacity: 100-3200t/h

Max.Feeding Size: 600-170mm

Applied Material: a variety of abrasive materials with medium hardness, whose compressive strength is no more than 100MPa and water content is less than 15%, such as coal, salt, chalk, gypsum, brick and limestone.

Introduction

PCZ heavy hammer crusher can crush stone and form once, without secondary crushing and shaping process, which can reduce the cost by about 40%, energy consumption, and investment. It is especially suitable for crushing limestone and stone with a compressive strength of less than 200MPa.

PCZ Heavy Hammer Crusher

Features

1. The PCZ heavy hammer crusher uses an external lubrication system including an oil pump, a fuel tank, and a pipeline. When the oil temperature is too high or the oil flow rate is too slow, the crusher will be automatically turned off.

2. Modular design, through the replacement of the cavity type, can achieve coarse, medium and fine crushing conversion, improve production efficiency

3. It adopts high-quality high-manganese steel and undergoes a strict process of heat treatment to obtain a single austenite structure. The service life is increased by more than five times compared with the original products such as manganese steel and rail, and the working efficiency is increased by more than 30%.

PCZ Heavy Hammer Crusher

Technical Parameter

Model	Rotor diameter×length (mm)	Feed opening Length×width (mm)	Feeding size (mm)	Capacity (t/h)	Power (kw)	Total weight (t)
PCZ1308	1300×790	910×890	≤400	100-160	132	2880×2130×2390
PCZ1410	1400×1000	1020×750	≤500	180-230	4P 160/2×90	2830×2100×2485
PCZ1610	1600×1000	1150×1000	≤600	260-350	132×2	3370×2415×2750
PCZ1615	1600×1500	1400×1000	≤600	380-550	200×2	3370×2925×2750
PCZ1716	1700×1600	1640×1300	≤650	600-850	250×2	3520×3000×3210
PCZ1720	1700×2000	1980×1300	≤650	700-1000	400×2	3670×3390×3330
PCZ1920	1900×2000	1850×1600	≤800	900-1500	500×2	3729×3300×4450
PCZ2225	2200×2500	2100×2300	≤1200	1500-3000	1250	4620×5380×4780